There’s little information available at the Japanese-language website about this model. But from the pictures, it’s clear that this is a precise model of the Nagant M1895 revolver, a handgun produced in vast numbers by Tsarist Russia and the Soviet Union. Other pictures at the link show that it’s articulated at several joints and can be loaded with wooden cartridges.

Link (Google Translate) -via The Firearms Blog

In the past, we’ve looked at somewhat fanciful efforts to improve the ammunition capacity of revolvers, including the use of feeding chains, superimposed loads, and stacked chambers. There’s not much information available about this solution except that it’s a single-action .38 that can fire 24 rounds.

Link via The Firearm Blog | Photo: Drefizzle

Home Gunsmith forum user rhmc24 took parts from a 12 gauge shotgun and a 1857 Remington revolver and created a shotgun with a revolving cycle:

Using chambers cut off 12 ga. scrap barrels and a new $10 bbl for an Italian auto shotgun, the only other gun part is a scrapped hammer from a 1857 Remington perc revolver. Loads like a SAA Colt but underlever rotates and cocks it. Blow-by is negligible, hardly noticeable with normal shirt sleeve.

Opened for some still shots, at top of the inside pix screwed in is the firing pin, impact type with return spring. The ratchet or star with the hand is visible below on the left side, also the pawl that cocks the hammer. The cylinder indexing lock is external, operated by the under lever. At very bottom the small knob releases the cylinder to turn clockwise for loading.

Due to limited equipment I was unable to copy existing mechanisms so it is pretty much designed from scratch, largely by cut and try, trial and error, etc.

There are two more detailed pictures at the link.

Link via Everyday, No Days Off

Brazilian armsmaker Taurus caused a stir when it released “The Judge” — a revolver that fires shotguns shells in addition to handgun cartridges. The Judge shoots .410 gauge shells as well as .45 Long Colt cartridges. “The Raging Judge”, pictured above, goes even further in this approach, firing the much larger 28 gauge shell.

Link | Photo: Firearms Blog

This unique revolver invented by John Walch in 1859. It has two triggers and two hammers to fire two rounds that were loaded into each chamber. James R. Rummel explains how it works:

The secret to the extra firepower is what is known as “superimposed loads”. Basically, the chambers are loaded with a powder charge with a bullet sitting on top, as is normal. Then another powder charge and bullet is loaded on top of the first.

The reason this doesn’t lead to an exploded gun and missing fingers is due to the unique ignition system. There are two percussion caps for every cylinder.

The gun is equipped with two hammers, and two triggers. Both hammers are cocked at the same time, but only the right-handed trigger is squeezed to set off the first shot. Then the left-hand trigger is squeezed, the left-hand hammer drops, and the second bullet goes flying. Cocking the hammers again will cause the cylinder to revolve as per normal.

Percussion caps are supposed to create a spark to set off the powder. Notice the ring of nipples to the outside of the cylinder? Those are the caps that are set off by the right-hand hammer, the hammer you are supposed to squeeze first. They don’t have a hole which goes directly into the back of the chamber, but instead channels the spark down a little tunnel. After about an inch, the tunnel makes a left hand turn and finally emerges into the chamber.

The hope is that the extra inch traveled will mean that the spark from the right-hand trigger will set off the powder charge in front, which will send the first bullet flying down the barrel while leaving the second bullet and powder charge untouched. The left-hand trigger will cause the left-hand hammer to drop, which will impact on the inner percussion cap, and hopefully cause the second charge to ignite.

Link | Photos: Hell in a Handbasket

Previously: 20-Shot Revolver

CasCity forum user Hedley Lamarr accessorized his black powder revolver with a scope and light for extra coolness and accuracy. I think that the gun is a Colt Single Action Army, which came into use in 1873.

Link via View from the Porch

Police said 19-year-old gang brother Zhuangren dimension, usually in the mountains more than 10 hotels Wai things put in charge possession of force, at any time ordered to carry weapons to parts of the scenes; within the lake precinct office yesterday morning to Linsen North Road, Suite A search in 7th floor “gun room” seized wheel and 6 rounds of canister-type shotgun, as well as four pistols, one a standard for the Beretta, and the other three for the transformation of the gun, and 15 bullets, blanks 19 made. The initial inventory, guns from the nickname “God pig” man.

This is the very large wheel shotguns, can be filled with 6 rounds of shotgun, the gun body are all constructed of steel, a short gun, weighing more than 3 kilograms, there is no rifling, can also be fitted sight, external trigger is not Buckle have no insurance, fill out bombs loaded on the mean, believe it or mistakenly pulled the trigger will fire, very dangerous.

Link via Hell in a Handbasket | Photo: Liberty Times

James Rummel has pictures and descriptions of five handguns that were very innovative designs, but turned out to be useless in real life. These include the Henrion, Dassy & Heuschen twenty-shot revolver, manufactured in France between 1921 and 1928.

Link

This fantastic papercraft model of Hellboy’s revolver The Good Samaritan features a working hinge and loadable bullets. It probably takes dozens of hours of tedious cutting and gluing, so why don’t we just gawk appreciatively at the pictures?

Link (in Japanese) – via Geekologie